3DM to STL converter

Convert .3dm files to .stl in your browser. Free, no account, and your model never leaves your device.

Never uploadedNo sign-upPreview in 3DUnits & up-axis handled

Loading tool…
3dfiles Pro: big files, STEP export, batches.Pro adds files over 100 MB, unlimited STEP export, fit-to-printer cuts, colour 3MF and big batches. Free for 7 days, or a one-off 7-day pass.
See Pro

How to convert 3DM to STL

  1. Drop your .3dm file into the box above, or click Choose file.
  2. Check the 3D preview, size and triangle count.
  3. Make sure STL is selected as the output format. Adjust scale or up-axis if needed.
  4. Click Download. The .stl file is created instantly on your device.

Why convert 3DM to STL?

Rhino models are the source files of rings, pendants, product housings and architectural pieces, but slicers and print services want STL. Converting 3DM to STL takes the surfaces Rhino has already tessellated, applies block positions and the model unit, and writes one printable mesh in millimetres.

What changes in the conversion

  • Colours are dropped. STL only stores geometry.
  • Geometry is preserved. Every triangle, with all object transforms applied, ends up in the new file.

3DM vs STL

3DMSTL
Full nameRhino 3D modelStereolithography
StoresNURBS geometry, meshes, layers, blocks and colours (shown here through the saved render meshes)geometry only
ColourYesNo
TexturesNoNo
Unitsstored in the filenone – most programs read STL numbers as millimetres
Exact CAD geometryNoNo

About the formats

3DM – Rhino 3D model

3DM (Rhino 3D model) was the native file of Rhinoceros (Rhino) by Robert McNeel & Associates, documented through the open-source openNURBS toolkit. It stores exact NURBS surfaces and solids, meshes, SubD, curves, layers, blocks and materials, usually together with the render meshes Rhino uses for shading. It is the working file of Rhino and Grasshopper users in jewellery, architecture, product and marine design. More about 3DM files

STL – Stereolithography

STL (Stereolithography) was created by 3D Systems in 1987 for its stereolithography printers. It describes only the surface of a model as a list of triangles, without colour, materials or units. It is the default file for 3D printing and the format almost every slicer (Cura, PrusaSlicer, Bambu Studio, Chitubox) opens. More about STL files

Common questions

Is this converter free?

Yes – completely free and unlimited, with no sign-up and no watermark, for files up to 100 MB. Pro adds files over 100 MB and batches of hundreds of files.

Are my files uploaded to a server?

No. The conversion runs entirely in your browser using WebAssembly and JavaScript. Your model never leaves your computer, which also makes it safe for confidential parts and patient data.

Is there a file size limit?

There is no fixed limit. Files of a few hundred megabytes work on a typical laptop; the practical limit is your device's memory.

Why are some surfaces missing?

The converter uses the render meshes Rhino stores in the file. A file saved with "Save small" has none, and an object Rhino never shaded may have none either. Open the file in Rhino, switch to Shaded or Rendered view once and save it again with "Save small" unticked.

How smooth is the STL?

As smooth as Rhino's render mesh. For jewellery and other small, curved parts, set Rhino's mesh quality higher (Document Properties → Mesh → Smooth and slower, or Custom) before saving, or use the Mesh command for full control.

Is my model kept in its real size?

Yes. The unit stored in the 3DM (millimetres, centimetres, inches, metres, feet) is converted, so the STL is in millimetres as slicers expect.