How many metres are on a 1 kg spool?
| Material | Density | 1.75 mm | 2.85 mm |
|---|---|---|---|
| PLA | 1.24 g/cm³ | ≈ 335 m | ≈ 126 m |
| PETG | 1.27 g/cm³ | ≈ 327 m | ≈ 123 m |
| ABS | 1.04 g/cm³ | ≈ 400 m | ≈ 151 m |
| ASA | 1.07 g/cm³ | ≈ 389 m | ≈ 147 m |
| TPU | 1.21 g/cm³ | ≈ 344 m | ≈ 130 m |
| Nylon (PA12) | 1.01 g/cm³ | ≈ 412 m | ≈ 155 m |
Length = weight ÷ (density × cross-section area). Lighter materials such as ABS give more metres per kilogram than PLA, which is why the same 1 kg spool lasts longer.
How much filament is left on my spool?
- Weigh the spool with the filament on it (a kitchen scale is fine).
- Enter the empty spool weight. It is often printed on the label; otherwise weigh an empty spool of the same brand. Cardboard spools are usually 140–250 g, plastic ones 200–300 g.
- The calculator shows the remaining metres – compare with your slicer's estimate before starting a long print.
Need the weight of a model rather than a spool? Use the STL volume calculator or the print cost calculator.
Common questions
How many grams is 1 metre of 1.75 mm PLA?
About 2.98 g. One metre of 2.85 mm PLA weighs about 7.9 g.
Why does my spool give fewer metres than calculated?
Real diameter varies (±0.02–0.05 mm), and some spools contain slightly more or less than the nominal weight. A 1.73 mm filament gives about 2 % more metres than 1.75 mm.
Is the spool weight included in "1 kg"?
No. A "1 kg spool" means 1 kg of filament; the empty spool comes on top.