The formulas
Belt axis: steps/mm = (motor steps per revolution × microstepping) ÷ (belt pitch × pulley teeth).
Lead screw: steps/mm = (motor steps per revolution × microstepping) ÷ screw lead.
Common values (1.8° motor, 16× microstepping)
| Drive | steps/mm | Klipper rotation_distance |
|---|---|---|
| GT2 belt, 20-tooth pulley | 80 | 40 |
| GT2 belt, 16-tooth pulley | 100 | 32 |
| T8 lead screw, 8 mm lead | 400 | 8 |
| T8 lead screw, 2 mm lead | 1600 | 2 |
A "T8" screw with 8 mm lead has four starts and a 2 mm pitch – lead (travel per revolution) is what counts, not pitch.
Microstepping and accuracy
Higher microstepping makes motion smoother and quieter, but does not make each step proportionally more accurate. 16× (often interpolated to 256× by the driver) is the common choice for printers.
Common questions
Where do I find the belt pitch?
Nearly all hobby printers use GT2 belts with 2 mm pitch. GT3 is 3 mm, HTD-3M 3 mm.
Klipper asks for rotation_distance, not steps/mm
rotation_distance is the travel per full motor revolution: belt pitch × pulley teeth, or the screw lead. The calculator shows both.