What is a G-code file?

A G-code file is a list of machine instructions that a slicer writes for one specific 3D printer: where to move, how fast, how much plastic to extrude and what temperatures to use. It is the file the printer actually runs, not a 3D model.

File extension.gcode, .gco, .g
TypeMachine instructions (tool paths)
Developed byMIT (numerical control), standardised as EIA RS-274
First released1950s; RS-274-D 1980
EncodingASCII text (Prusa .bgcode is a binary variant)
Colour / materialsOnly as tool-change commands
UnitsMillimetres (G21) or inches (G20)
Exact CAD geometry—
MIME type—
Opens in 3dfilesYes – G-code viewer

Open a G-code file

About the G-code format

G-code comes from the numerical-control machines of the 1950s and is still the language of CNC mills and FDM 3D printers. A slicer turns an STL or 3MF into thousands of short moves for a given printer, nozzle, filament and settings, so a G-code file made for one printer should not be sent to another.

You can preview a G-code file to check layers, travel moves and print time, but you cannot reliably turn it back into the original model – it only contains the paths of the nozzle.

What a G-code file looks like inside

G-code

M140 S60        ; bed to 60 °C
M104 S215       ; nozzle to 215 °C
G28             ; home all axes
G21             ; millimetres
G90             ; absolute positions
M83             ; relative extrusion
G1 Z0.2 F3000   ; first layer height
G1 X50 Y50 E0.8 F1500   ; move while extruding 0.8 mm of filament

G0/G1 are moves (with E for extrusion and F for speed in mm/min), M104/M109 set the nozzle temperature, M140/M190 the bed. Comments start with ;.

How to open a G-code file

  1. Preview it layer by layer in the G-code viewer.
  2. Desktop: the slicer that made it (PrusaSlicer, Bambu Studio, OrcaSlicer, Cura) has a G-code preview.

Common problems

Can I convert G-code to STL?

Not faithfully – the file only holds nozzle paths. Ask for the STL, 3MF or STEP the print was sliced from.

Printer rejects the file

It was sliced for a different printer or firmware (Marlin, Klipper, Bambu). Re-slice the model for your printer.

Questions about G-code files

What is a .bgcode file?

Prusa's binary G-code (2023): the same commands, compressed, with embedded thumbnails and metadata. It is only for Prusa printers and firmware.