STEP to 3MF converter

Convert .step files to .3mf in your browser. Free, no account, and your model never leaves your device.

Never uploadedNo sign-upPreview in 3DUnits & up-axis handled

Loading tool…
3dfiles Pro: big files, STEP export, batches.Pro adds files over 100 MB, unlimited STEP export, fit-to-printer cuts, colour 3MF and big batches. Free for 7 days, or a one-off 7-day pass.
See Pro

How to convert STEP to 3MF

  1. Drop your .step file into the box above, or click Choose file.
  2. Check the 3D preview, size and triangle count.
  3. Make sure 3MF is selected as the output format. Adjust scale or up-axis if needed.
  4. Click Download. The .3mf file is created instantly on your device.

Why convert STEP to 3MF?

Bambu Studio, OrcaSlicer and PrusaSlicer prefer 3MF. Converting STEP to 3MF tessellates the CAD part and keeps each body of an assembly as its own object, with units stored explicitly – so it lands in the slicer at the right size, ready to arrange on the plate.

What changes in the conversion

  • Surfaces become triangles. STEP stores exact curved surfaces; 3MF stores a triangle mesh. Curves are approximated with a fine tolerance.
  • Geometry is preserved. Every triangle, with all object transforms applied, ends up in the new file.

STEP vs 3MF

STEP3MF
Full nameISO 10303 (STEP AP203/AP214/AP242)3D Manufacturing Format
Storesexact solids, assemblies and part namesgeometry, units, colours and (slicer-specific) print settings
ColourYesYes
TexturesNoNo
Unitsstored in the file (usually millimetres)stored in the file (usually millimetres)
Exact CAD geometryYesNo

About the formats

STEP – ISO 10303 (STEP AP203/AP214/AP242)

STEP (ISO 10303 (STEP AP203/AP214/AP242)) was standardised as ISO 10303 for exchanging engineering data between CAD systems. It describes exact solid geometry (B-rep surfaces, edges and assemblies) rather than triangles. It is the neutral CAD format used by SolidWorks, Fusion 360, Inventor, CATIA, FreeCAD and Onshape. More about STEP files

3MF – 3D Manufacturing Format

3MF (3D Manufacturing Format) was developed by the 3MF Consortium (Microsoft, HP, Autodesk, Ultimaker and others) since 2015. It is a zipped XML package that stores meshes together with units, colours, materials and print settings. It is the modern replacement for STL in 3D printing – PrusaSlicer, Bambu Studio and Cura save projects as 3MF. More about 3MF files

Common problems when converting STEP to 3MF

  • Curves turn into facets. STEP stores exact cylinders and fillets; 3MF stores triangles. The surfaces are tessellated finely enough for printing, and the triangle count is shown before you download.
  • An assembly prints as one block. Each solid in the STEP is written as a separate 3MF object, so the slicer lists the parts individually and you can arrange, delete or assign filaments per part instead of receiving one fused mesh.
  • The part lies in the wrong orientation. CAD models are drawn in their working position, not their printing position. Use the print checker to find the orientation with the least support.
  • Wrong size. Rare with this pair: the 3MF is always written in millimetres and slicers apply that automatically. If the part was drawn in inches and arrives 25.4 times too small, check the size panel and scale it during conversion.

Tips for best results

3MF is the better print format for CAD parts than STL: it is a compressed ZIP, typically a fraction of the STL size, it records the unit, and it keeps the parts of an assembly apart. Bambu Studio, OrcaSlicer, PrusaSlicer and Cura all open it directly.

Both .step and .stp files are accepted, as are large assemblies; tessellation runs in a background thread so the page stays responsive. If your slicer is an older one that does not read 3MF, use STEP to STL instead.

Common questions

Is this converter free?

Yes. You can convert STEP to 3MF for free – 2 CAD conversions a day, with no sign-up and no watermark. Pro gives you unlimited STEP conversions, batch conversion and every tool (free for 7 days).

Are my files uploaded to a server?

No. The conversion runs entirely in your browser using WebAssembly and JavaScript. Your model never leaves your computer, which also makes it safe for confidential parts and patient data.

Is there a file size limit?

There is no fixed limit. Files of a few hundred megabytes work on a typical laptop; the practical limit is your device's memory.

Do I still need to convert STEP if my slicer opens STEP directly?

Bambu Studio, OrcaSlicer and PrusaSlicer can import STEP themselves. Converting is useful for other slicers, for sharing a small print-ready file, or when the slicer import fails on a large assembly.

Are the colours of the STEP file kept?

No. The 3MF is written with geometry only; assign filaments per object in the slicer.